ASSEMBLY INSTRUCTIONS FOR THE PV-24/42
ANGLE SUPPORTS TABLE TOP
TABLE BASE
* NOTE
A TENON
B MORTISE HOLE
HARDWARE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to
avoid marring the wood.
NOTE: During assembly of the furniture please match all joints
with the corresponding letters or numbers stamped on the furniture.
STEP-II
Flip the TABLE BASE upside
down and with the help of
another person carefully install
the ANGLE SUPPORTS and
the
BOTTOM
BASE
SUPPORT as shown in the
assembly pictures (use of a rubber mallet may be necessary to drive all joints together).
NOTE: ANGLE SUPPORTS, TABLE BASE and BOTTOM BASE SUPPORT are all
marked with letter and/or numbers for accurate assembly.
Once all joints fit snugly
together secure the BOTTOM BASE SUPPORT with the knock down bolts and washers
provided.
NOTE: Slide the split washer on first followed by the flat washer onto the
bolt).
