Kingsford 12301648 Product Manual Download Page 1

Product Guide
Model 12301648

Tools needed for assembly:

Phillips Screwdriver
Adjustable Wrench

FOR OUTDOOR USE ONLY

CAUTION:

Read and follow all safety statements, assembly instructions, 
and use and care directions before attempting to assemble 
and cook.

INSTALLER/ASSEMBLER:

Leave this manual with consumer.

CONSUMER:

Keep this manual for future reference.

WARNING:

Failure to follow all manufacturer’s instructions could 
result in serious personal injury and/or property 
damage.

CAUTION:

Some parts may contain sharp edges.   Wear 
protective gloves if necessary.

WARNING:

CARBON MONOXIDE HAZARD

Burning charcoal inside can kill you. It gives off carbon 
monoxide, which has no odor. NEVER burn charcoal inside 
homes, vehicles, or tents.

CAUTION:

THIS UNIT IS HEAVY!

 

DO NOT

 attempt to 

assemble without a helper.

If you have questions or need assistance during assembly, please call Char-Broil at 

.

To insure your satisfaction and for follow-up service,

 

register your appliance online at

 www.charbroil.com/register

1-800-241-7548

42804821 -12301648 - 10/27/11

Date Purchased

IMPORTANT: Fill out the product record information below.

30” Charcoal Grill

KINGSFORD® AND THE KINGSFORD LOGO ARE REGISTERED TRADEMARKS OF THE KINGSFORD PRODUCTS COMPANY, LLC AND ARE 
USED UNDER LICENSE BY CHAR-BROIL, LLC. ALL RIGHTS RESERVED.

© 2011 Char-Broil, LLC

Printed in China

 • Columbus, GA 31902 • 

Summary of Contents for 12301648





















Reviews: