6
DRAFT
V1.1
3. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You can change the settings to meet your
requirements. Please make sure that the camera is in the SET mode.
Press “
MENU
” key to enter/exit the menu. Press “
UP/DOWN
” key to move the marker, press “
Enter
” key to
confirm the change. Always remember to press “
Enter
” to save the change. Otherwise you will lose your new
setting.
3.1 PARAMETER SETTINGS
Parameter
Settings
Description
Mode
Camera Video
Cam + Video
Select whether still photos or video clips are taken. In Cam + Video mode,
can first take photos and then shoot videos afterward.
Language
Enter
Multi language
Photo Size
20M
16M
12M
…..
Select desired resolution for still photos from 1 to 20 mega pixels. Higher
resolution produces better quality photos, but creates larger files that take
more of the TF card capacity. Besides, larger files require longer time to write
to the TF card, which will slightly slow the shutter speed.
Video Size
4K
2K
1080P
Select video resolution(pixels per frame ). Higher resolution produces better
quality videos, but creates larger files that take more of the TF card capacity.
Photo No.
01 photo
02 photo
03 photo
Select the number of photos taken in sequence per trigger in Camera mode.
Please also refer to the interval parameter.
Video Length
AVI
Optional from 3s
to 5min
Videos are in AVI format that can be played back on most video players.
Interval
1Min
Optional from 5s
to 60min
Select the shortest length of time that the camera will wait until it responds to
any subsequent triggers from the PlR sensor after a game is first detected.
During the selected interval, the camera will not take pictures/videos. this
prevents the TF card from filling up with too many redundant images.
Sense Level
Normal
High
Low
Select the sensitivity of the PlR sensor. The High setting suits Select the
sensitivity of the PlR sensor. The High setting suits indoors and environments
with little interference, while the Normal/Low suits outdoors and environments
with more interference. Temperature also affects the sensitivity. The High
setting is suitable when the ambient temperature is warm, and the Low setting
is helpful in cold weather.
Set Date/Time
Enter
Press Enter to set up date and time
Timer
On
Off
Select On if you only want the camera to work within a specified time period
every day. For instance, if the starting time is set at 18:35and the ending time
at 8:25, the camera will function from 18:35 the current day to 8:25 the next
day. Outside the time period the camera will not be triggered or take photos/
videos.
Time Lapse
On
Off
lf set On, the camera will automatically take photos/videos according to the
set interval, regardless of whether the PIR sensor has detected any game.
This is helpful when observing cold-blooded animals like snakes, or the
process of flowering, etc
