Enjoy your work
20
HYDRAULIC SHOP PRESSOPERATION MANUAL
NO.
9TY512-20
Page 1: ...Enjoy your work 20 HYDRAULIC SHOP PRESS OPERATION MANUAL NO 9TY512 20 ...
Page 2: ...ame Disconnect the air inlet fitting from the air source Clean the outside of the press with dry clean and soft cloth and periodically lubricate the joints and all moving parts with a light oil as needed When not in use store the press in a dry location with ram and piston fully retracted When press efficiency drops purge always air from hydraulic system as described before Check the hydraulic oil...
Page 3: ...d wear non skid footwear Only use this press on a surface that is stable level dry and not slippery and capable of sustaining the load Keep the surface clean tidy and free form unrelated materials and ensure that there is adequate lighting Check to ensure that all applicable bolts and nuts are ifrmly tightened Do not use the shop press to compress spring or any other item that could disengage and ...
Page 4: ...t M10x30mm Nuts bolt M12x35mm Washer Ø12 Spring washer Ø12 Nuts M12 Kinghthead Nuts bolt M10x130mm Washer Ø10 Spring washer Ø10 Nuts M10 Stay bar Press bed frame Bell vlock Support pins Pressure pump 2 2 1 4 6 6 6 2 4 4 4 4 4 4 4 4 2 2 2 1 4 4 1 1 8 8 8 8 2 2 1 1 1 1 1 1 1 Nuts bolt M10x20mm Spring washer Ø10 Under round nut Jack fired seat Nuts bolt M16x35mm Washer Ø16 Spring washer Ø16 Nuts M16 ...