Enjoy your work
2.5
HYDRAULIC GARAGE JACKOPERATION MANUAL
NO.
9TY133
Page 1: ...Enjoy your work 2 5 HYDRAULIC GARAGE JACK OPERATION MANUAL NO 9TY133 ...
Page 2: ...up and down Immediately support the vehicle with appropriately rated jack stands after lifting Turn the handle release valve slowly counterclockwise to lower the vehicle onto jack stands LIFTING Turn the handle release valve clockwise to the closed position Do not over tighten Pump the handle up and down to lift vehicle off jack stands Remove the jack stands Do not get under or let anyone get unde...
Page 3: ...ized air Repeat above steps until trapped air is completely vented LUBRICATION AND CLEANING AIR VENTING PROCEDURES Problems Causes Solutions Jack will not lift the load Jack will not hold the load Jack will not descend to minimum height or will not remain in lowered position Jack will not lift to max height Jack will not function properly after trying solution 1 Release valve not tightly closed 2 ...
Page 4: ...escription Qty Screw Handle socket Screw Cylinder assembly Spring Linkage Cotter pin Retaining ring Ø25 Cover board Linking pin Lifting arm assembly Wall plate assembly Supporting shaft Saddle Nut m12 Retaining ring Ø16 Front wheel Retaining ring Ø18 Washer Retaining washer Ø16 Nut m16 Cover plug Rear wheel assembly Bolt m12x25 Back shaft Retaining ring Ø12 Retaining ring Ø14 Handle Washer Screw m...
