King Pigeon R10 User Manual Download Page 57 | Manualshive

Page: 57 / 57

background image

Page 57 of 57

King Pigeon Hi-Tech. Co., Ltd.

Ver 1.0

4G Wireless Industrial Router

Wireless Data Connectivity

Click the <Factory Defaults> button and confirm to restore the factory settings.

5.11.7 Password

Default username/password is admin, cannot be modified, password can be modified, maximum support
16 bits. For security reasons, please modify this password and save it.

Set as follows:

Step1:

Enter the original password in the <Old Password> text box; enter the new password

in the <New Password> text box, and re-enter the new password in the <Verify Password> text box
to confirm.

Step2:

Click the <APPLY> button to complete the password modification.

6. Warranty

1) This device is warranted to be free of defects in material and workmanship for one year.
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the
Operating Instructions. In no event shall the manufacturer be liable for any router altered by purchasers.

The End!

Any questions please help to contact us feel free.

Http://www.IOT-SOLUTION.com

«
...
55
56
57

Summary of Contents for R10


























































Reviews:

No comments

Related manuals for R10

Brand: Abocom Pages: 3

Brand: jbmedia Pages: 6

Brand: Shenzhen Hongdian Technologies Pages: 135

Brand: D-Link Pages: 101

Brand: Konig Pages: 6

Brand: Zte Pages: 32

Brand: Cisco MERAKI Pages: 27

Brand: BRANDLUXE Pages: 49

Brand: ADS-tec Pages: 2

Brand: Marley Pages: 23

Brand: EnGenius Pages: 2

Brand: EnGenius Pages: 3

Brand: Nimbus Water Systems Pages: 10

Brand: Rutenbeck Pages: 4

Ibex-RT-610 Series

Brand: Westermo Pages: 30

Brand: Watchguard Pages: 17

Brand: Watchguard Pages: 28

Brand: Watchguard Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands