King Pigeon R10 User Manual Download Page 54

Page: 54 / 57

Page 54 of 57

King Pigeon Hi-Tech. Co., Ltd.

Ver 1.0

4G Wireless Industrial Router

Wireless Data Connectivity

Reboot Device

The system reboot is divided into a timed restart (Reboot device after x minutes) and a Regular reboot
(the system reboot at one time in the day).

5.11.2 Time-setting

Remote @Management

Item

Description

Default

Time Zone

Select your own time zone and the wireless router will automatically get
time from the network.

Beijing

Use the default
NTP server

Tick it,the wireless router updates the time from the default NTP server.
By default, the wireless router's default NTP server is used.

Ticked

Use the NTP
Server below

If you need to set up another NTP server, tick it and enter the address (in
the form of IP address or domain name) of the NTP server in the text box.
The wireless router updates the time to the specified NTP server.

Untick

5.11.3 Backup & Restore

Backup Settings

Summary of Contents for R10


























































Search results

Summary of Contents for R10

Reviews:

Related manuals for R10

Brands by name

Popular brands

King Pigeon R10, User Manual

Search results

Summary of Contents for R10

Reviews:

Related manuals for R10

Brands by name

Popular brands