AUS OA8300 08-03-17
Page 1
Model AU8300
Amplifi ed HDTV Antenna
Output: 12V / 100mA
Input: 230-240V / 50Hz / 0.2A
Power Supply
: AC/DC Adaptor
Reception Frequencies
VHF: 54-216 MHz
UHF: 470-698 MHz
FM: 87.9-107.9 MHz
STEP 1:
Verify all components and parts are included.
STEP 2:
Install the KING Jack Antenna in one of two ways (page 2):
• RV Mounting:
Mount to a bat wing style retractable arm using the supplied RV Antenna Bracket.
• Pole Mounting:
Mount to a stationary pole (on a house for example) using the supplied Pole Mount
Bracket.
DO NOT MOUNT TO A POLE ON A VEHICLE.
STEP 3:
READ THE FOLLOWING INFORMATION CAREFULLY, THEN CHOOSE A CONNECTION OPTION
ON PAGE 3 AND MAKE CONNECTIONS.
The KING Jack antenna is an amplifi ed antenna that re12 volts power.
STEP 4:
Read the OPERATING INSTRUCTIONS on page 4 for antenna pointing instructions.
Page 1
When using an existing power injector already in the RV
When replacing an existing amplifi ed antenna that has an existing power injector, just replace
the antenna head assembly and verify that you have power to the KING Jack antenna when the
wall switch power injector is “ON.” A red LED light on the bottom of the KING Jack antenna will
illuminate when +12 volts is present and the internal amplifi er is powered. Do not use both the
existing power injector and the power injector supplied with the KING Jack Antenna!
Using two power injectors in the circuit can cause the KING Jack Antenna
power supply to overheat, possibly causing injury or severe damage.
Use either the existing power injector or the KING Jack power injector.
WARNING: DO NOT USE BOTH POWER INJECTORS!
A typical power injector for an
existing RV antenna will be a wall
plate or an A/V distribution box with
an ON/OFF type switch.
When using the KING Jack antenna with the supplied power injector
Verify that any existing power injector has been disconnected.
STEP 1
STEP 2
STEP 3
STEP 4
More information https://www.caravansplus.com.au
