background image

COPYRIGHT © 2006 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

CORDLESS DRILL

plus

plus

performance

performance

INSTRUCTION MANUAL

MODELS: 8014, 8018, 8024

14.4V

18V

24V

WARRANTY INFORMATION

2-YEAR 

LIMITED WARRANTY

FOR THIS CORDLESS DRILL

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED 

WARRANTY FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality
and durability standards. KING CANADA warrants to the original retail consumer a
2-year limited warranty as of the date the product was purchased at retail and that
each product is free from defects in materials. Warranty does not apply to defects
due directly or indirectly to misuse, abuse, negligence or accidents, repairs or
alterations and lack of maintenance. KING CANADA shall in no event be liable for
death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty,
the product or part must be returned for examination by the retailer. Shipping and
handling charges may apply. If a defect is found, KING CANADA will either repair
or replace the product.

 

Summary of Contents for 8014






Reviews: