background image

 

Kinetic Solar 

65 Martin Ross Ave. Unit 1 

www.Kineticsolar.com 

 

1-416-665-3755

 

Commercial | Residential | Industrial | Institutional 

Fixed Angle Ground Mount Installation Guide

 

Revised Aug-2020 

©2020 All Rights Reserved

 

Disclaimer 

Kinetic  Solar  Racking  and  Mounting  Inc.  (Kinetic  Solar)  does  not  install  any  components  of  its  Racking  and 
Mounting systems. Kinetic Solar Racking and Mounting does not have any duty or  responsibility for safe and 
proper installation and/or maintenance of its Racking and Mounting systems; including job site safety standards 
and procedures. 

All  installation  work  must  comply  with  the  applicable  regional  and  local  regulations  or  other  national  or 
international electrical standards and are the sole responsibility of the installer, contractor and/or developer. 

Kinetic Solar  Racking and Mounting shall not be held responsible for damages of any kind, including but not 
limited to: bodily harm, damage to property or injury. Kinetic Solar Inc. shall not be held responsible for the proper 
compliance or  non-compliance with the instructions detailed in this manual including handling solar  modules, 
solar racking or system installation. 

Before  attempting  to  install,  operate  or  service  a  Kinetic  Solar  system,  all  instructions  should  be  read  and 
understood. Failure to follow these instructions/guidelines may result in death, injury or property damage. 

Module  manufacturer’s  guidelines  should  be  followed  at  all  times.    Modules  mounting  guidelines  should  be 
followed at all times.  Ensure recommended rail spacing is consistent with the provided structure. It is the sole 
responsibility of the customer to ensure that a compatible module is used. 

Solar module width and/or length will determine the exact rail spacing. (Please refer to the module manufacturer’s 
specifications) 

Please retain this manual for future reference. Kinetic Solar reserves the right to make additions, deletions and 
modifications to the content of this document without prior notice. 

This manual is only valid for the following Kinetic Solar Racking Systems: Static Ground Mount Models Starting 
with SKU KLGM or KRGM  

The instructions contained in this manual are exclusive to the products referenced. Use of any other products in 
conjunction with the listed products is done at one’s own risk. 

 

 

 

Summary of Contents for KLGM





















Reviews: