AFTER THE PILOT FLAME HAS BEEN EXTINGUISHED, IF YOU WISH TO
RE-LIGHT THE APPLIANCE YOU MUST WAIT AT LEAST THREE MINUTES
BEFORE TRYING TO RE-LIGHT THE APPLIANCE.
Finally, hand the Installation and Maintenance Instructions and the Users
Instructions over to the customer and explain the operation of the fire.
3.4
REMOVAL & RE-FITTING OF THE TRIM ASSEMBLY
a)
The aluminium trim is attached to the lid of the combustion chamber by
hooking the retaining lip on the rear face of the trim assembly over the
top of the combustion chamber lid as shown below in Fig. 29 & 30
Fig. 29
Fig. 30
b)
The aluminium trim is retained at the base of the firebox by the magnets
supplied.
c)
Ensure that the air intakes as shown in Fig. 31 overpage are not
obstructed by the trim.
Locating flange on trim
Locating flange on trim
located correctly on flange of
combustion chamber lid.
23
