SECTION 2
INSTALLATION OF FIRE
2.1
UNPACKING THE FIRE
Carefully lift the fire out of the carton. Remove the loose item packaging carefully
from the front of the appliance. Check the contents as listed :-
Packing Check List
1 off
Fire box / burner assembly
1 off
Boxed ceramic base, front ceramic rail and 18 coals (16 large, 2 small) -
Kalahari Plus models only
or
Boxed ceramic base, front ceramic rail and 14 pebbles (12 large, 2
small) - Camber Plus models only
1 off
Loose items bag, which includes (where applicable) :-
1 off
Remote control handset (RC models only)
1 off
Restrictor baffle (all models)
1 off
Cable fixing kit (all models)
1 off
45mm grommet (all models)
1 off
Installation & user instruction book (all models)
3 off
1.5V batteries (EFC models only)
5 off
1.5V batteries (RC models only, 3 off for control valve, 2 off for handset)
1 off
1.5V battery (SC models only)
1 off
Guarantee card (all models)
1 off
Camber fascia (Camber Plus models only)
1 off
Pebble set (if ordered as an optional extra) pack 2 of 2
2.2
INSTALLING THE FIRE BOX
Establish which type of flue you are intending to install the fire in to :-
225 x 225mm (9 inch x 9 inch) brick built chimneys 175mm (7 inch) diameter lined brick or stone
flue, insulated pre-fabricated metal flue box to BS 715 / BS EN 1856-2 or Pre-Cast Flue to BS EN
1858
When installing into 125mm (5 inch) diameter lined brick or stone flue, or insulated pre-fabricated
metal flue box to BS 715 / BS EN 1856-2. the restrictor baffle must not be fitted.
A spillage test must always be carried out to check satisfactory
clearance of flue products, regardless of the type of flue the
appliance is being fitted to.
10