Kinco HP043-20DT, User Manual

Page: 10 / 53

Kinco-HP
User Manual
10
In PC, the programming port of HMI-PLC will be a virtual COM port, you must install
the driver for it when using in PC first time. After finishing installing software Kincobuilder ,
there will be different drivers in the path “\Kincobulider V***\Drivers\” for different versions
of Windows system. Right now it can only support Windows XP, Windows 7 and Windows 8.
When connecting programming cable to HMI-PLC and PC first time, Windows system will
detect new hardware and mention installing driver, users can install the driver according to
the version of Windows.
2.1.3 Serial Communication Port
HMI-PLC provides 1 communication ports,PORT1 .It supports baudrate up to
115.2kbps.PORT1 can be used as programming port and also support Modbus RTU slave
protocol and free protocol.
And please refers to 2.3 Wiring Diagram to know about their pin assignment.
2.1.4 High Speed Counter and High Speed Pulse Output
HMI-PLC provides 4 high speed counters (HSC0~HSC3).High speed counter
supports multiple modes: single phase, CW/CCW(Up/Down),AB phase (1 multiplication and
4 multiplication).HSC0 and HSC1 can support up to 50KHz(Include single phase and AB