Differential pressure transmitter
CP 111 – CP 112 – CP 113
KEY POINTS
Material :
ABS V0 as per UL94
Protection :
IP65
Display :
LCD 10 digits. Size : 50 x 17 mm
Height of digits :
Value : 10 mm ; Unit : 5 mm
Connections :
ribbed, Ø 6.2 mm
Cable gland :
for cables Ø 8 mm maximum
Weight :
143 g
- Ranges from -100/+100 Pa to -10000/+10000 Pa (according to models)
- Configurable intermediary ranges
- 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA
output, passive loop, power supply from 16 to 30 Vdc (2 wires)
- ABS V0 housing, IP65, with or without display
- “¼ turn” system mounting with wall-mount plate
- Housing with simplified mounting system
- Solenoid valve for auto-calibration (only on CP111 model)
FEATURES OF THE HOUSING
TECHNICAL FEATURES
Measurement units
Pa, mmH
2
O, inWG, mmHG, daPa, kPa, hPa, mbar
Accuracy*
CP111 :
±1% of reading ±2 Pa ;
CP112 :
±1.5% of reading ±3 Pa ;
CP113 :
±1.5% of reading ±3 mmH
2
O
Response time
1/e (63%) 0.3 s
Resolution
1 Pa ; 0.1 mmH
2
O ; 0.01 mbar ; 0.01 inWG ; 0.01 mmHG ; 0.1 daPa ; 0.001 kPa
Autozero
Manual with push-button ; Automatic by solenoid valve (only on CP111 model)
Type of fluid
Air and neutral gases
Overpressure tolerated
CP111/112 :
21 000 Pa –
CP113
: 69 000 Pa
Operating temperature
From 0 to +50 °C
Storage temperature
From -10 to +70 °C
Measuring range
1 :
-100/+100 Pa
2 :
-1000/+1000 Pa
3 :
-10 000/+10 000 Pa
PART NUMBER
CP 11
To order, just add the codes to complete the part number :
Power supply / Output
A :
Active – 24 Vac/Vdc – 0-10 V or 4-20 mA
P :
Passive – 16/30 Vdc – 4-20 mA
Display
O :
with display
N :
without display
Example : CP 113 – AO
Pressure transmitter measuring range -10 000/+10 000 Pa,
0-10 V or 4-20 mA active, with display
*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.
46 mm
90 mm
1
0
9
m
m
