Kimo 210-R Series, User Manual, Page: 10 / 32

➢
Press OK .
The backlight level blinks.
➢
Set it between 0 and 10 pressing Up and Down keys.
➢
Press
OK
.
4.3. Lock the keypad: F 140
For more safety and avoid any unwanted manipulation, it is possible to lock the keys of the transmitter.
“F 112”
sub-folder is displayed.
➢
Press Up key.
“F 140” is displayed with “OFF” meaning that the locking is deactivated.
➢
Press OK .
“OFF” blinks.
➢
Press Up or Down key, “ON” blinks, then press OK .
“LOCK” is displayed for a few seconds then the transmitter displays the measured values.
All the keys are inactive.
To reactivate them:
➢
Press for 10 seconds on OK key.
“LOCK”
blinks for a few seconds then the measured values are displayed and the keys are activated.
10
F 100: CONFIGURE THE TRANSMITTER