Casegoods Assembly Instructions
Definition
®
Page 1 of 2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part No. 1741611 Revision D-04
Keyhole Top, U Top, and P Top
Tools Required
■
Tape Measure
■
Screw Gun
■
#2 Phillips Head Bit
■
Level
Hardware Required
■
#8 x
⁵⁄₈
" Flathead
■
#8 x 1" Flathead
■
#8 x
⁵⁄₈
" Panhead
■
Bracket
Installation
1. Keyhole tops, U tops or P tops can be configured either as
work returns or as desking elements. These tops should
never be used as freestanding furniture. (Figure A).
2. To assemble the T-leg end panel, attach the brackets to
the end panels, then attach brackets to support panel using
the #8 x
⁵⁄₈
" flathead screws provided. (Figure B).
3. To install the end panel, place worksurface on a clean, soft
surface, underside facing up. The end panel should be
located with a margin of
⁵⁄₆₄
" around the front, side, and
back. (Figure C).
Figure A
Figure B
Figure C
Support Panel
⁵⁄₆₄
"
⁵⁄₆₄
"
⁵⁄₆₄
"
P Top
Keyhole Top
U Top
End Panel
