Kimans HYDRASONIC S8, User Manual

Page: 8 / 14

5. Display Menu
The calculator has a liquid crystal display with 8 digits and special characters. The values that can be shown are
divided into five display loops. All data is retrieved using the push-button next to the display.
At the start you are automatically in the main loop (1st level).
By pressing the push-button longer than 4 seconds you change to the next display loop. Keep the push- button
pressed until you reach the desired information loop.
By pressing the push-button briefly each time you can scan all the information within a loop. After 2 minutes of
non-use of the push-button, the display will automatically be deactivated.
[Ref. next page]