Kilotech KPC 15K, Owner'S Manual

Page: 6 / 10

KPC 3k and 15k
MAN08152022
LCD Icons:
Icon DESCRIPTION
Charging mode.
Battery capacity.
Stable weight.
→T← Tare.
→0← Zero.
HOLD Weighing hold.
PCS Pieces - Counting function.
BASIC PARAMETER SETTING
Press and hold “MODE” + “→0←” together for 3 seconds until “= = = = = =”is displayed then release. The
following parameters can then be set.
Step Operation Display Remark
01 Press MODE “OFF 0”
Auto power off function: “0” means scale will never power off.
The maximum setting is 60 minutes.
*Press “→T←” and “→0←” to change data.
*Press “MODE” to confirm and enter into next step.
02 Press MODE “bp On”
Buzzer On or OFF setting
*Press “→0←” to change data.
*Press “MODE” to confirm and enter into next step.
03 Press MODE “Pr. AB”
Backlight setting.
A=0~2 can be selected.
0=backlight always off
1= when weighing and the weight is stable, backlight will
turn off after the numbers of seconds set in the B setting
below.
2= when zero displayed the backlight is off; when weighing
and the weight is stable the backlight is on.
B=1~9 means 10~90 seconds of backlight (only when A=1 is
selected above.)
Ex: B=1, means backlight stays on for 10 sec.
*Press “→ T←” to change data A, press “→0←” to change data
B.
*Press “MODE” to confirm and enter into next step.