18
IX.
Other Instructions:
1. The optimal use of this Battery Screwdriver is no more than 8 hours per day.
2. The repair and maintenance of the Battery Screwdriver can be sent to the designated
after-sales service center or the local service center via the original dealer. If the product is
disassembled by the customer, our company will not be responsible for repairs.
3. If the customer sends the Battery Screwdriver to a service center that is not designated
by our company for repair or self-disassembly, the resulting quality issue will not be
covered by the warranty.
4. It is the responsibility of the management department of the Battery Screwdriver to
assure this manual be provided and readby the operators or users . Do not attempt to
repair the Battery Screwdriver by yourself.
5. To remove the protective cover, please remove the slots on both sides as shown in the
following figure. To install the protective cover, have the protective cover notch
downward and push the Battery Screwdriver into it, and assure it is stuck in slots, as
shown in the following figure.
6. Please use our company’s specified testing equipment and screws to test PTM Impact
Screwdriver.
7. This screwdriver is of clutch type mechanical control and the test conditions is based
ISO 6789.
Description of Compatibility
of Battery and Battery Station
1.
Please use our company’s specified Battery, and consult with the agent to introduce
according to the customer needs.
2.
Our Battery Screwdriver and Battery built-in ID Identification Function Protection, it
cannot be activated if using non-original Battery or Battery Screwdriver.
Loa
FIGURE 1
FIGURE 2
Slots
