Kikusui TOS9200, Operation Manual

Page: 70 / 172

3-32 Basic Operations TOS9200/9201
3.6 Settings for Insulation Resistance Testing
To make settings for an insulation resistance test, use the Insulation Resistance-Test
Setting screen (IR).
To jump to this screen, press the IR key. The LED on the IR key will then light up.
The Insulation Resistance-Test Setting screen has three pages from IR1 to IR3.
To move between these pages, press the SHIFT key + keys. To return to IR1
from IR2 or IR3, press the IR key.
• No setting can be made in the KEYLOCK status.
The three IR pages allow the following settings to be made:
IR1
• Test voltage
• Lower resistance (LOWER) and ON/OFF of the lower judgement function
• Upper resistance (UPPER) and ON/OFF of the upper judgement function
• Test time (TEST TIME) and ON/OFF of the timer function
IR2
• Voltage rise time (RISE TIME)
• Judgement wait time (WAIT TIME)
• LOW/GUARD settings for the GND
IR3
• Channel settings for the high-voltage scanner
• ON/OFF of the contact check function
To move the cursor between items, use the keys.
When a function is shown on the F1 to F5 keys, they can be used to jump to the tar-
get item. To conduct the operations displayed on these keys, press the SHIFT key +
the F1 to F5 keys.
NOTE