Kikusui TOS9200, Operation Manual

Page: 19 / 172

TOS9200/9201 Preface P-7
■
High-v olta ge output terminal on the rear panel
The rear panel includes a high-v oltage output terminal to be used for an optional
high-v oltage scanner . This terminal also f acilitates wiring when you mount the
tester on a rack.
■
Small and lightweight
F or A C withstanding v oltage testing, the T OS9200/T OS9201 is pro vided with an
output po wer supply 2.5 times that of Kikusui’ s con v entional testers, in addition to
DC withstanding v oltage and insulation resistance testing mechanisms. Ne v erthe -
less, its body is 30 % smaller in both size and weight than that of Kikusui’ s con v en -
tional models.
• This tester handles a high v oltage of 5 kV A C/6 kVDC . Theref ore , do not
touch the DUT or cab les , as electr ic shoc k ma y result.
Around the DUT , pro vide full saf ety measures such as an enclosure to
k eep w or k ers a w a y . In addition, to ensure saf ety , e x ercise e xtreme care to
pre v ent the output of a high v oltage due to improper connections and oper -
ations .
Options
The follo wing options are a v ailable for this tester:
■
RC01-T OS/ RC02-T OS remote-contr ol bo x
This remote-control box is used for remote control of the start/stop operations of
this tester . It is connected to the REMO TE terminal on the front panel.
The RC01-T OS has one ST AR T switch. The RC02-T OS has tw o ST AR T switches,
and starts operation only when both are pressed simultaneously .
Function
OPERA TE switch
The TEST -switch operation is ef fecti v e only when the OPERA TE switch is on.
Operation is forcibly stopped when the switch is turned of f.
ST AR T switch
This switch starts a test only when the OPERA TE switch is on and in the ready
status.
ST OP switch
This switch is used to cut of f the output v oltage and cancel the F AIL status.
It performs the same function as the ST OP switch on the front panel.
WARNING