T
O
S
8040
Safety
Sym
b
ols
3
or
I
ndicates that a high voltage (over 1
000
V) is used here.
T
ouching
the part causes a possibly fatal electric shock.
I
f physical contact
is required by your work, start work only after you make sure that
no voltage is output here.
DANGER
I
ndicates an imminently hazardous situation which, if ignored,
will result in death or serious injury.
I
ndicates a potentially hazardous situation which, if ignored,
could result in death or serious injury.
I
ndicates a potentially hazardous situation which, if ignored, may
result in damage to the product and other property.
S
hows that the act indicated is prohibited.
I
s placed before the sign “
DANGER
,” “W
ARNING
,” or “C
AUTION
”
to emphasize these. When this symbol is marked on the product,
see the relevant sections in this manual.
P
rotective conductor terminal.
Chassis (frame) terminal.
O
n (supply)
O
ff (supply)
I
n position of a bi-stable push control
O
ut position of a bi-stable push control
W
ARNING
C
AUTION
S
afety
S
ymbols
For the safe use and safe maintenance of this product, the following
symbols are used throughout this manual and on the product.
U
nder-
stand the meanings of the symbols and observe the instructions they
indicate (the choice of symbols used depends on the products).