Kikusui TOS6200A, User Manual, Page: 59 / 154

TOS6200A/6210 Basic Operation 4-25
4.6.1 Storing in the Panel Memory
• To store test conditions, first determine the memory number, then enter the name
as shown below. Moving the cursor to the memory number after setting a name
restores the entered name to the previous name.
1.
Press the MAIN key to display the MAIN screen and set test conditions.
2.
Press the RECALL/STORE key with the SHIFT key held down.
This displays the indication "STO **: --UNTITLED--" to the right of the
screen title.
3.
Use the rotary knob to set the memory number (from 00 to 99) to which
test conditions are to be stored.
4.
Press the key to move the cursor to "--UNTITLED--."
5.
Use the rotary knob to enter a memory name.
ASCII code characters from 20 H to 7EH are valid. (See Appendix A.2.)
6.
Press the ENTER key to store the test conditions to this memory number.
Moving the cursor to another area before pressing the ENTER key will abort
the storage operation. After the conditions are stored, the letters "STO" will
change on the LCD to "MEM."
NOTE
▲
CURRENT LOWER UPPER TIMER
10.0
A
0.100 10.0
s
MAIN MAIN
FREQ LOWER ON OFFSET ON TIMER ON
50Hz
STO 04 : IEC60204-1
UPPER