Kikusui TOS6200A, User Manual, Page: 12 / 154

1-6 General TOS6200A/6210
1.3 Options
The following options are available for the tester.
■
RC01-TOS/RC02-TOS Remote Control Box
When connected to the REMOTE terminal on the front panel, remote control boxes
are used to control tester start/stop functions.
The RC01-TOS has one START switch, while the RC02-TOS has two START
switches. For the RC02-TOS, a test starts only when both switches are pressed
simultaneously.
Functions
OPERATE switch
Test switches are enabled only when this switch is set to the ON position.
When it is set to the OFF position, a test in progress will be stopped.
START switch
With the OPERATE switch set to ON and the tester in ready status, press this
switch to start testing.
STOP switch
Used to shut off output voltage or cancel a FAIL status; has the same function
as the STOP switch located on the tester.
RC01-TOS:
200mm(W) x 70mm(H) x 39mm(D) RC02-TOS:
330mm(W) x 70mm(H) x 39mm(D)