Kikusui TOS5200, User Manual

Page: 21 / 82

TOS5200
21
2
Inst
a
llat
ion a
nd Prep
aration
Using the Protection Cover
When the product is shipped from the factory, a protection cover is attached to the front
panel. This cover prevents unintentional changes to the test conditions. Remove this cover
when you want to set the test conditions.
Even when the cover is attached, you can still recall settings from memory, start and stop
tests, perform remote operations, and control the TOS5200 through its USB port. If the tester
will be used to repeatedly perform tests with fixed conditions, such as when being used as
part of a manufacturing line, attach the protection cover to ensure safe operation of the tester.
This is useful in preventing incorrect operation of the tester.
If the cover is damaged or lost, contact your Kikusui agent or distributor.
■
Removing the protection cover
Loosen the screw, and then pull the
hook centered at the bottom of the
cover towards you to remove the pro-
tection cover from the panel.
■
Attaching the protection cover
Insert the tabs at the top of the cover into the slots in the panel, push the bottom part of the
cover until it is attached to the panel, and then use the screw to fix the cover in place.
■
Storing the protection cover
When you want to use the
TOS5200 without the protection
cover attached, such as when you
will repeatedly perform tests with
frequently changed test condi-
tions, you can store the protection
cover on the product’s bottom
panel. This is useful in preventing
the cover from being lost.
Use the screw to fix the cover to
the product’s bottom panel.
OUTPUT
CONFIG LIMIT ON/OFF ON/OFF KEY LOCK
SET
VOLTAGE
UPR/LWR
CURRENT
R / T/ F
TIMER
LOCAL
S SHIFT
Loosen the screw.
Pull the tab toward you.
TOS5200 bottom panel
Use the screw to fasten
the cover in place.