Kikusui TOS3200, User Manual

Page: 76 / 130

76
TOS3200
Creating Sequence Programs
To create a sequence program, enter the edit screen from the program test screen.
1
Press the AUTO key.
The program test screen 1/2 (AUTO1/2) appears.
2
Use the rotary knob to select a new program or the program you want to
edit.
3
Press the EDIT (SHIFT+AUTO) key.
“EDIT” appears on the screen, and the edit screen is displayed.
Inserting a Step in a New Program
Default values of the step that is inserted
SHIFT
SYSTEM
RECALL ENTER
STORE
MANUAL
I / F EDIT
AUTO
RMT
PREV NEXT
1
3
2
F1
AUTO 1 / 2
NTWK:A MODE:RMS ABORT:OFF
–– END
PRG
00:--UNTITLED--
EDIT
INS
AUTO 1 / 2
NTWK:A MODE:RMS ABORT:OFF
00 TC•E
NC
P
E
––P
NRM
•NORM––– 1s
–– END
PRG
00:--UNTITLED--
EDIT
INS LOWER WAIT TIMER
LOWER : OFF
UPPER : 15.0mA
WAIT :
OFF
TIMER : 1s
UPPER
Press the F1 key.
The end of the step sequence is selected.
A step with a default value is inserted above END.
Item Default value items common to the step Default value
Operation mode TC Measurement network (NTWK) A
Connection destination of the mea-
surement terminal (PROBE)
E
NC
P
E
Current measurement mode
(MODE)
RMS
Polarity of the EUT power line (POL) NORM Measurement range (RANGE) AUTO
Single fault mode (COND) NORM
Operation for FAIL judgment
(ABORT)
OFF
Interval time 1 s
Upper reference (UPPER) 15 mA
Lower reference (LOWER) OFF (30 µA)
Test time (TIMER) ON (1 s)
Test wait time (WAIT) OFF (1 s)