Kikusui TOS3200, User Manual

Page: 26 / 130

26
TOS3200
Connecting the Power Cord
Connecting the Power Cord for the TOS3200
1
Turn the POWER switch off.
2
Check that the AC power line complies with the input rating of the
TOS3200.
The voltage that can be applied is any of the nominal power supply voltages in the
range of 100 Vac to 240 Vac. The frequency is 50 Hz or 60 Hz.
3
Connect the power cord to the AC inlet (AC LINE) on the rear panel, and
connect the power cord plug to an outlet with proper grounding.
Connecting the Power Cord for the EUT
The power to the EUT is supplied through the TOS3200. The input rating of the EUT must
meet the input rating of the power input to the EUT of the TOS3200.
• Input voltage range: 85 V to 250 V
• Frequency: 50 Hz or 60 Hz
• Maximum power: 1500 VA
1
Check that the AC power line to be connected complies with the input
rating of the power input for the EUT above.
2
Connect the power cord to the AC inlet (AC LINE IN) on the rear panel,
and connect the power cord plug to an outlet with proper grounding.
Fig. 2-4 Plug connection
WARNING
The rated current of the supplied power cord is 10 A. To prevent fire, replace the
power cord with an appropriate one if the input current to the EUT exceeds 10 A.
If you are using the TOS3200 in Meter Mode, you do not have to connect the power cord for
the EUT.
To a three-prong outlet
with proper grounding