Kikusui PWX750ML, User Manual

Page: 101 / 110

PWX
101
Options
App
You can use rack mount slide rails CC3001-00-S160 to mount the PWX750ML to a rack.
Power cord
This is the power cord that is used to connect the product to the AC line. The following three
types are available.
Adapter cable (RD-8P/ 9P)
This is an adapter cable for connecting the
product to an RS232C interface.
Parallel operation signal cable
This cable is used when you perform parallel operations. The following three types are avail-
able.
Slide rail for rack mounting
CC3001-00-S160
(Made by General Devices)
Use #10-32 screws with a maximum length
of 0.38 inches to mount the slide rails.
Tightening torque: 2.87 N•m to 3.58 N•m
CC3001-00-S160
AC2-3P3M-IEC320-UL
Rated voltage: 125 V
Rated current: 15 A
Plug: NEMA5-15 AC1-3P2R5M-IEC320-EU
Rated voltage: 250 V
Rated current: 10 A
Plug: CEE7/7 AC1-3P2R5M-IEC320-CN
Rated voltage: 250 V
Rated current: 10 A
Plug: GB1002
2 m in length (typ.)
PC02-PWX (for operating
three units in parallel)
PC01-PWX (for operating
two units in parallel) PC03-PWX (for operating
four units in parallel)