Kikusui PMX32-3DU, User Manual

Page: 46 / 104

46
User’s Manual
PMX_MULTI
Basic Functions | CONFIG Settings
CF03 (
LOC
) Key lock content
The key lock function locks the panel. Select from the following three values.
CF04 (
E.OUT
) External control for turning output on and off
Enables or disables output on/off control using an external contact
(p.63)
.
Can be set separately for each channel.
CF05 (
E.LOG
) External control logic for turning output on and off
Sets the logic that is used for output on/off control using an external contact
(p.63)
.
Can be set separately for each channel.
CF06 (
PRIO
) Output-on startup state
Sets the prioritized operation mode when the output is turned on
(p.36)
. Can be set separately for each
channel.
CF07 (
RIS.T
) Rise time when a value is changed
You can set the rise time that is applied when you change a value
(p.29)
. Can be set separately for each
channel.
If you specify “
FAST
,” the rising waveform may become unstable and distort.
Display Description
LOC1
Lock1 Only the OUTPUT key and recalling of memory (A/B/C) are
allowed.
LOC2 Lock2 Only the OUTPUT key can be used.
LOC3
Lock3 All keys and rotary operations are disabled (factory default set-
ting).
Display Description
OFF OFF Disabled (factory default setting)
ON
ON Enabled
Display Description
LO LOW The output is turned on with a LOW signal (0 V to 0.5 V) or short
circuit (factory default setting).
HI
HIGH The output is turned on with a HIGH signal (4.5 V to 5 V) or open
circuit.
Display Description
CV
CV CV (constant voltage) is prioritized (factory default setting).
CC
CC CC (constant current) is prioritized.
Display Description
SLOW
SLOW The value rises in 100 ms (factory default setting).
FAST FAST The value rises in 10 ms.