Kikusui PLZ-4W Series User Manual Download | Manualshive

Page: 93 / 218

background image

PLZ-4W

Applied Operation 6-3

6.1.1

Saving to ABC preset memories

Three separate sets of settings for each range of each operation mode can be saved
to memories A, B, and C. The settings can be saved even when the load is turned on.

1.

Select the ABC preset memories.

First, switch to the desired operation mode and set the range and value.
Next, press the ABC (SHIFT+ENTER) key.

Three keys A, B, and C illuminate.

2.

Save to the memory.

Press the A, B, or C memory key.

The pressed key illuminates.
[The settings are saved to the selected memory. The key that is illumi-
nated turns off when the setting is changed.

6.1.2

Recalling ABC preset memories

There are two methods for recalling memories: SAFETY and DIRECT. By default,
the SAFETY method is selected.

SAFETY

In this method, you check the memory contents on the display before actually
recalling the settings.

DIRECT

In this method, the settings saved to memory A, B, or C are recalled directly. The
recalled settings are immediately applied as current settings.

■

Changing to the DIRECT method

By default, the SAFETY method (in which the memory contents are checked on the
display before actually applying them) is selected. If set to the DIRECT method, the
settings of the recalled memory are applied immediately. The recall method is
switched from the menu.

1.

Check that the load is turned off.

Check that the LOAD LED is turned off. If it is on, press the LOAD key to turn
it off.

2.

Select the menu setup.

Press the MENU (SHIFT+SET/VSET) key.

The menu appears.

«
...
91
92
93
94
95
...
»

Summary of Contents for PLZ-4W Series



























































































































































































































Reviews:

No comments

Related manuals for PLZ-4W Series

Brand: TCS Basys Controls Pages: 2

Brand: Acclaim Lighting Pages: 32

Brand: Harpo Pages: 35

Brand: Hardi Pages: 2

Brand: tams elektronik Pages: 12

Brand: Casambi Pages: 2

WisBlock RAK19012

Brand: RAK Pages: 12

NETBuilder II DPE 80

Brand: 3Com Pages: 32

Brand: 4IPNET Pages: 11

Brand: Zonex Pages: 16

Brand: Taylor Pages: 34

THRUSTER COMMAND TCD 1022 E

Brand: Quick Pages: 56

AQUACULTURE AQC-A1-333-150

Brand: Senect Pages: 49

MP23xxxiec Series

Brand: YASKAWA Pages: 102

Brand: O&O Pages: 64

Brand: Zennio Pages: 2

Brand: Velux Pages: 20

Brand: Velleman Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands