Kikusui PLZ-4W Series, User Manual

Page: 126 / 218

6-36 Applied Operation PLZ-4W
6.6.7 Executing, Pausing, Stopping the Sequence
■
Executing the Sequence
1. Check that the switching function and short function are turned off.
Check that the SW ON key is turned off and that the short icon is not dis-
played. Even if turned on, the switching function and short function are forc-
ibly turned off when the sequence execution screen is entered.
2. Enter the sequence execution screen.
Press the RUN/STOP (SHIFT+B) or PAUSE (SHIFT+C) key.
The sequence execution screen appears.
3. Select the program number to be executed.
Turn the rotary knob to show the program number to be executed.
Select 1 to 10 for normal sequence or 11 for fast sequence.
4. Execute the sequence.
Press the RUN/STOP (SHIFT+B) key to execute the selected program.
The measured values during execution are shown on the display.
When the sequence operation is completed., a pop-up window appears.
5. Press the ENTER key to exit from the sequence execution screen.
• If you press the RUN/STOP (SHIFT+B) key again after stopping the sequence,
the selected program is executed from the beginning.
■
Pausing the sequence.
While the sequence is executing, press the PAUSE (SHIFT+C) key.
The PAUSE screen appears, and the sequence operation pauses.
To resume the operation, press the PAUSE (SHIFT+C) key again. If you press the
RUN/STOP (SHIFT+B) key when the sequence is paused, the sequence operation
stops.
• If a pause is speci fi ed in a step (PAUSE ON), the sequence operation automati-
cally stops after executing the step. In this case also, press the PAUSE (SHIFT+C)
key to resume the operation.
■
Stopping the sequence.
Press the RUN/STOP (SHIFT+B) key.
The selected program stops.
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
H 33A 150V
PROG No. 1
Pro
g
ram1
SEL PROG NO
RUN
No. 1:Pro g ram1
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
H 33A 150V
Completed
SEQ
ENTER
No. 1:Pro
g
ram1
NOTE
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
H 33A 150V
STOP CONT
No. 1:Pro g ram1
PAUSED
NOTE