Kikusui PFX2731S, Operation Manual

Page: 17 / 54

PFX2731S
Operation Manual
17
Preparation
Connecting to a PC
Connect this product to the PC via the LAN interface and assign an IP address.
You can connect directly (a single unit) or connect through a switching hub (multiple units).
Connecting unit directly to the PC (when using only one
unit)
You can connect this product directly to the PC using a LAN cable. You can use up to six channels.
Connecting units through a switching hub (when using
multiple units)
If you will use multiple units, use LAN cables to connect them to the PC through a switching hub.
Use the LAN cable (STP cable) shielded with a material that is insensitive to noise and electromagnetic
waves.
One PC is capable of supporting up to four units and 24 channels.
 Recommended switching hubs
To the LAN port
To the LAN port
PC
LAN cable (straight)
PFX2731S
Model Manufacturer Number of
ports Notes
IESH-MB205-R Misumi 5 Data rate: 10/100 Mbps
Latency: 3924 ns (for 64 bytes bucket)
Buffer size: 768 kbit
Communication protocol: 10BASE-T/100BASE-TX,
CATE5Estraight (CATE5E cross is also available.)
Maximum transmission distance: 100 m
IESH-MB208-R Misumi 8