Kikusui PFX2515, Operation Manual, Page: 57 / 104

PFX2512_CE
57
3
Op
e
ra
ti
o
n
s
Test Procedure
To perform charge/discharge tests, use BPChecker3000 for the PFX2512 to configure settings such
as the information of the connected devices and the test conditions. When the test is executed for
the first time, follow the instruction specified below.
BPChecker3000 test procedure
Io Config
1
Configure the hardware.
Activate “Io Config.”
Specify the channel that you want to configure, and then set the PFX2512 model ID. If
you want to use a fixed IP address, set the PFX2512 IP address.
If you want to use temperature chambers, set the temperature chamber driver, VISA
resource, and the number of temperature chambers.
Test Condition Editor
2
Set the testing conditions.
Activate “Test Condition Editor.”
Create and edit the test conditions.
Test Executive
3
Execute the test.
Activate “Test Executive.”
The charge/discharge test is executed with the test conditions that you created with
“Test Condition Editor.”
Graph Viewer
4
Analyze the test result.
Activate “Graph Viewer.”
Graph the test data that was created by “Test Executive,” and display or print this
data.
?
Help
?
Help
?
Help
?
Help