Kikusui PFX2515, Operation Manual, Page: 44 / 104

44
PFX2512_CE
Preparation of the DUT (battery) Connection
Standard accessories of the PFX2512 does not include the cable
*1
for connecting to the DUT
(battery). Prepare the cable applied to description of the DUT (battery).
Wires and tools required for connecion
*1. The dedicated load cable (TL08-PFX) is available as an optional item for connecting between the
PFX2512 and the DUT (battery).
（ p. 20 ）
• DUT cable
The cable used for the charge / discharge current between the
PFX2512 and the DUT(battery).
• Voltage sensing cable
The cable used for sensing of the electro voltage of the DUT
(battery).
• Temperature sensing cable
The cable used for sensing of the temperature of the DUT
(battery).
See
DUT cable
PFX2512
Example of the connecting configuration of the PFX2512 and the DUT (battery)
Temperature sensing cable (Shielded wire)
Thermistor
DUT (battery)
Voltage sensing cable
(Shielded wire)
+
+
S
+ DUT
–
– DUT
–
S
+
T
–
T
Wires DUT cables (stranded wire) See “Nominal cross-sectional area of cables and allowable
currents (reference)”
（
p. 45
）
Sensing cable
0.20 mm
2
(AWG24) to 0.52 mm
2
(AWG20), Shielded wire
Flat-blade screwdriver Axis diameter : φ3, End width : 2.6 mm
Wire stripper Wire stripper suitable for the wires described above.