Kikusui PFX2500 Series, Operation Manual

Page: 36 / 144

36
PFX2512
Connecting to DC Power Supplies
Connecting the DC Power Supply Control Cable
1
Attach the included lock lever to the SC07-PFX I/F cable for the PWR-01.
Attach it to the connector on the side with the ferrite core.
If the lock lever is not attached, the connector may come off.
.
2
Confirm that the POWER switch of all connected equipments are turned off.
3
Insert the I/F cable SC07-PFX for PWR-01 into the DC POWER SUPPLY
connector of the PFX2512.
Insert the end with a ferrite core into the PFX2512.
Insert it securely using the lock lever. Check that it does not fall out.
I
4
Insert the other end of the I/F cable SC07-PFX for PWR-01 to the "J1" and "J2"
connector on the DC POWER SUPPLY.
Insert it securely, and check that it does not fall out.
Lock lever
Memo
If you reverse the cable
ends, it will not work.
I/F cable for PWR-01
Lock lever
Ferrite core