Kikusui PFX2500 Series Operation Manual Download

Page: 102 / 144

102

PFX2512

Connecting to the PFX2512

Using the included 14-core flat cable and the EX01-PFX connection board, connect the SL01-PFX to
the PFX2512.

Check that all devices that you will connect are turned off.

Install the EX01-PFX in the leftmost available option slot on the PFX2512.

If OP02-PFX units are installed, install the EX01-PFX in the leftmost available slot to the
right of the OP02-PFX units.

Attach the included lock lever and ferrite core to the included 14-core flat
cable.

The connector may fall out if you do not attach the lock lever.

Connect the ferrite core end of the 14-core flat cable to the SYNC IN connector
on the SL01-PFX rear panel.

Check that it does not fall out.

SYNC IN
connector

SYNC OUT
connector

14-core
flat cable

OP03-PFX

EX01-PFX

SL01-PFX

PFX2512

Install the EX01-PFX in the leftmost available option slot of the PFX2512.
If OP02-PFX units are installed, install the EX01-PFX in the leftmost available slot to the right of the
OP02-PFX units.

Lock lever

Ferrite core

14-core flat cable

SL01-PFX

Summary of Contents for PFX2500 Series

















































































































































Search results

Summary of Contents for PFX2500 Series

Reviews:

Related manuals for PFX2500 Series

Brands by name

Popular brands

Kikusui PFX2500 Series, Operation Manual

Search results

Summary of Contents for PFX2500 Series

Reviews:

Related manuals for PFX2500 Series

Brands by name

Popular brands