Kikusui PFX2000 Series, Operation Manual, Page: 62 / 104

4-4 Maintenance PFX2000
4.2 Inspection
Power cord
Check that the insulation coating is not broken, that the crimp terminal is not loose,
and that the wire is not broken.
•
Be sure to turn off the power switch on the device and the switchboard switch.
•
Breaks in the insulation coating may cause electric shock. If a break is
found, stop using it immediately.
To purchase accessories, contact your Kikusui agent or distributor.
4.3 Calibration
The product is calibrated at the factory before shipment. However, periodic calibra-
tion is necessary due to changes that occur after extended use.
For calibration, contact your Kikusui agent or distributor.
WARNING