Kikusui PFX2000 Series, Operation Manual, Page: 38 / 104

1-22 Setup PFX2000
Fig. 1-12 TP-BUS Connector Connection
7 mm
7 mm
Rear panel
TP-BUS connector
TP-BUS connector provided
(plug)
(a) Insert the plug
Turn this screw using a screwdriver
and fix the wires in place.
Twisted-pair wires (AWG22)
Number of twists: 1 turn/cm
(b) Connect the devices at each
end of the bus
Turn this screw using a
screwdriver and fix the
wires in place.
Twisted-pair wires (AWG22)
Number of twists: 1 turn/cm
Twist the section that has
been stripped.
(c) Connect the devices in the
middle
on the bus