KIKUSUI Electronics Corp.
160
CURR:PEAK:LOW
Sets the output current peak limit of the negative electric potential
Command
[SOURce:]CURRent:PEAK:LOWer[:IMMediate] <numeric>[,(@chanlist)]
[SOURce:]CURRent:PEAK:LOWer[:IMMediate]? [(@chanlist)]
Parameter
Value:
10 % of the maximum current [A] to 420 % of the maximum current [A]
(The default value is MAXimum)
Unit:
A
Settings are reset to default values when an *RST command is sent.
Example
CURR:PEAK:LOW -120
Response: NR3
