Kikusui PBZ20-20, User Manual, Page: 85 / 170

PBZ
85
Configuration (CONFIG)
3
Memory
, Response, an
d Config
uratio
n
Setting and Viewing CONFIG Settings
1
Press CONFIG.
The CONFIG key illuminates, and the CONFIG setup screen (CONFIG[1]) appears.
2
Press CONFIG to select the page that contains the item you want to set.
The CONFIG setup screen has seven pages, from CONFIG[1] to CONFIG[7].
If you are just checking the settings, check the items on all the pages, and proceed to
step Procedure 6.
3
Use the up and down cursor keys to select a setting.
The cursor moves to the value. You can switch the page by continuously pressing the
up or down cursor key.
4
Use the rotary knob or numeric keys to specify the value.
p. 73
If you fix the value that you specified using the rotary knob, the input value is
confirmed. If you are using the numeric keys to specify the value, press ENTER to
confirm the input value.
5
To specify other settings, repeat steps Procedure 2 to 4.
6
To set up other features, press a key other than CONFIG.
The CONFIG key turns off. The CONFIG setup completes, and the PBZ switches to
the feature for the key that you pressed.
7
If you have changed parallel operation or remote interface settings, turn
the power switch off and then on again.
The settings are applied.
Cursor
See