Kikusui PBZ20-20, User Manual, Page: 121 / 170

PBZ
121
4
Se
quences
Executing Scripts
When a script is executed, the multiple programs that it contains are executed in the order
specified in the script.
• Press RUN/PAUSE or STOP to make the PBZ enter the program execution (SEQ
EXECUTION) state.
• Press RUN/PAUSE to start the execution.
• The programs in the script are executed according to the instructions in the script.
• If you press RUN/PAUSE, the execution is paused.
• If the program is designed to wait for a trigger signal, it enters the WAIT state.
• When all of the programs in the script complete, the PBZ enters the COMPLETED state.
• Press ENTER.
The PBZ returns to the state where you can set the DC signal (as if you had pressed the
DC key).
• To abort execution, press STOP or OUTPUT. If you press OUTPUT, regardless of the
programmed output settings, the output is turned off.
• If an alarm is generated, the PBZ enters the ALARM state.
TRIG IN: ON
TRIG IN
RUN/PAUSE
ENTER ENTER
STOP
COMPLETED
RUN PAUSE WAIT
ABORT
TRIG IN: ON
TRIG IN
STOP
RUN PAUSE WAIT
TRIG IN: ON
TRIG IN
STOP
OUTPUT
OUTPUT
OUTPUT
RUN PAUSE WAIT
Start
End
P01
P02
Pnn
ALM CLR
ALM CLR
ALARM
ALARM
ALARM
ALARM
ALARM
ALARM
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE
RUN/PAUSE RUN/PAUSE