PAV LAN
33
4
Specifications
Output specifications
LAN specifications
Item
Specifications
Rating
Rating and accuracy when LAN is
used
Same as when the PAV is remotely controlled using RS232 or RS485.
Item
Specifications
Electric specifications
Ethernet
Complies with IEEE 802.3u.
Auto MDIX
Automatically detects whether the connection uses a straight or crossover
cable.
Auto negotiation
Automatically detects 10Base-T (10 Mbps) or 100Base-T (100 Mbps).
Network configuration
MAC address
KIKUSUI address: 00:0F:CE:xx:xx:xx
IP address
Can be viewed or changed from the front panel.
DHCP
The PAV obtains the address from a DHCP server on the network.
Auto IP
The PAV automatically assigns the IP address to itself. 169.254.xxx.xxx
Static (fixed) IP
An IP address of your choice can be set from the PAV front panel.
Host name
Complies with the NetBIOS protocol. Can be set from the webpage.
Duplicate IP detection
Rejects duplicate IP addresses or disconnects from the network.
Subnet mask
Assigned by DHCP or can be set from the webpage.
Default gateway
Assigned by DHCP or can be set from the webpage.
DNS server
Can be set by DHCP.
LAN reset
Reset is possible from the front panel or using an SCPI command.
LAN protocol
TCP
LAN packets comply with the Transmission Control Protocol.
IPv4
Internet Protocol version 4
Implemented protocols
VXI-11
Supports core channel.
Abort channel and interrupt channel are not supported.
VISA
VXI-11 compliant
Uses RPC, Portmapper, and SCPI commands.
TCP socket
Sends SCPI commands to port number 8003.
UDP socket
Sends SCPI commands to port number 8005.
VXI-11 discovery
Detects connected devices.
SNMP Ping server
Checks the LAN connection to devices.
HTTP
Web server supporting JavaScript and Java applets
Command
SCPI
Commands, measurement, and status comply with SCPI 1999.
IEEE 488.2
Supports status and event register tree.
