Kikusui PAT160-25T, Operation Manual

Page: 64 / 218

4-22
PAT-T 4kW
CF43 RS232C flow control setting
p. 7-4
Sets whether to perform flow control of RS232C. The setting is possible even when
the product is used as a slave unit.
CF50 Interface version display
Displays the version of the factory option interface. Displayed only when the
interface is installed.
CF51 GPIB address setting
p. 7-6
Sets the GPIB address. The settings are displayed only when the factory option
GPIB interface is installed.
CF52 Vendor ID display
Displays the vendor ID. Displayed only when the factory option USB interface is
installed.
CF53 Product ID display
Displays the product ID. Displayed only when the factory option USB interface is
installed.
CF54 Remote interface setting
Sets the remote interface that is to be used. Displayed only when the factory option
interface is installed. The displayed settings vary depending on the installed
interface option. The setting is possible even when the product is used as a slave
unit.
The installed interface becomes the default.
When the GPIB interface is installed
See
Settings Description
oFF Disable flo w control
on Enable flo w control (factory defa u lt)
Display Description
1.00 Interface version
See
Settings Description
1 to 30 Specify the address bet w een 1 (factory defa u lt) and 30
Display Description
0b3E 0x0B3E
Display Description
100E 0x100E
Settings Description
232C Use RS232C for the remote interface
GPib Use GPIB for the remote interface (factory defa u lt)