Kikusui PAN 110-1.5A, Operation Manual

Page: 150 / 160

7-20 PAN-A
Speci fi cations of PAN-A Series Model 1000W
Model 1000W
PAN
16-50A
PAN
35-30A
PAN
60-20A
Input
Power consumption, at 100 VAC,
rated load Approx.
1600 VA Approx.
1800 VA Approx.
2100 VA
Output
Voltage Rated voltage 16 V 35 V 60 V
Variable range 0 V to 16V 0 V to 35V 0 V to 60V
Resolution (theoret-
ical value)
*16
3 mV 7 mV 11 mV
Number of turns of
control knob 10 turns
Current Rated current 50 A 30 A 20 A
Variable range 0 A to 50 A 0 A to 30 A 0 A to 20 A
Resolution (theoret-
ical value)
*16
9 mA 5.4 mA 3.6 mA
Number of turns of
control knob 10 turns
Constant voltage characteristics
Ripple and noise
(5 Hz to 1 MHz) RMS 0.5 mV
Source effect (to ±10 % of AC
input voltage) 0.005 %+1 mV
Load effect (to 0 % to 100 % of
output current)
*17
0.005 %+2 mV 0.005 %+1 mV 0.005 %+1 mV
Transient response (standard
value)
*17, *18
50 μ s
Temperature coef fi cient 100 ppm/ ˚ C (TYP value)
*16 The value is calculated from the number of turns of the wire-wound potentiometer. In practice,
use 3-5 times each value as a target.
*17 Measured at the OUTPUT terminal board on the rear panel using the remote sensing function.
*18 Time necessary for output voltage to return to ±(0.05 %+10 mV) max. of rated value at 5 % to
100 % changes of output current.