Kikusui PAN 110-1.5A, Operation Manual

Page: 132 / 160

7-2 PAN-A
Speci fi cations of PAN-A Series Model 175W
Model 175W PAN16-10A PAN35-5A PAN60-3A
Input
Power consumption, at 100 VAC,
rated load Approx.400 VA Approx.400 VA Approx.350 VA
Output
Voltage Rated voltage 16 V 35 V 60 V
Variable range 0 V to 16V 0 V to 35V 0 V to 60V
Resolution (theoret-
ical value)
*2
3 mV 7 mV 11 mV
Number of turns of
control knob 10 turns
Current Rated current 10 A 5 A 3 A
Variable range 0 A to 10 A 0 A to 5 A 0 A to 3 A
Resolution (theoret-
ical value)
*2
1.8 mA 0.9 mA 0.6 mA
Number of turns of
control knob 10 turns
Constant voltage characteristics
Ripple and noise
(5 Hz to 1 MHz) RMS 0.5 mV
Source effect (to ±10 % of AC
input voltage) 0.005 %+1 mV
Load effect (to 0 % to 100 % of
output current)
*3
0.005 %+1 mV
Transient response
(standard value)
*3, *4
50 μ s
Temperature coef fi cient 100 ppm/ ˚ C (TYP value)
*2 The value is calculated from the number of turns of the wire-wound potentiometer. In practice,
use 3-5 times each value as a target.
*3 Measured at the OUTPUT terminal board on the rear panel using the remote sensing function.
*4 Time necessary for output voltage to return to ±(0.05 %+10 mV) max. of rated value at 5 % to
100 % changes of output current.