Kikusui KJM6310, Operation Manual

Page: 11 / 56

KJM6310 Preface P-1
Preface
About This Manual
This operation manual describes the KJM6310 Time Interval Jitter
Meter.
■
ROM version of the product to which this manual
applies
• Ver. 1.0 X
The *IDN? message is used to verify the version. For a description of
the *IDN? message, see chapter 4, “RS-232C Control."
When contacting us about the product, please provide us the version
number and the manufacturing number that are attached to the rear
panel.
Product Overview
The KJM6310 is an instrument used to measure jitters of CDs. It can
measure the RF to CLOCK jitter by the time interval method.
The KJM6310 can be used for the development, adjustment, and
inspection of optical pickups.
It is a compact unit for embedded applications that is designed to
maximize the work ef fi ciency on the production line.
To provide the KJM6310 at low cost, the item to be measured has
been limited to CDs, and meters and panel switches have been
removed. The KJM6310 is designed to be used on a single adjustment
line. However, peripheral circuits required for making measurements
such as symmetry follow-up circuit, PLL clock regeneration circuit,
and phase-difference correction circuit are equipped as standard.