Kikusui KHA3000, Operation Manual, Page: 95 / 392

5
KHA3000
95
Setting the Harm
onic Test
61000-3-2
Limitation Standards, Classes and Nominal Values
No. Menu item Description Default
1 Limitation Std Select a limit value standard. Selecting IEC 61000-3-12 2004 or IEC
61000-3-12 2011 displays a menu for equipment with input current 75 A
or less. Abbreviated Standard names are shown on the display. IEC 61000-3-2
Ed5.0
2 Meas Technic Select a measuring technique standard. IEC 61000-4-7 Ed2.1 and IEC
61000-4-7 Ed2.0 measure interharmonic waves and specifies the result
as a harmonic group value. IEC 61000-4-7 Ed2.1 or IEC 61000-4-7
Ed2.0 are recommended for measuring fluctuating harmonics.
Abbreviated Standard names are shown on the display. IEC 61000-4-7
Ed2.1
3 Class Select the class of the EUT. The limit value for the selected class is
used. A
4 Nominal Voltage Specify the rated power voltage of the EUT. Select “ 230 V ” (fixed value)
or “ Specified. ”
230 V
5 Specified Nominal Volt When “ Specified ” was selected in the F1 menu, enter the rated power
voltage of the EUT.
The input range is 100 V to 600 V.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
230 V
6 Nominal Frequency Select the rated power frequency of the EUT. 50 Hz
7 Return Terminates the specification of the nominal voltage and frequency. –
8 To Meas Setting Page Switches to page 4/4. –
9 Prev/Next Page 1/4 Switches to another menu page. –
F key: Function key. You can also use the ESC key to return.
Menu 1/4
F1
Limitation Std
IEC 61000-3-2 Ed3.0
JIS 61000-3-2 2019
IEC 61000-3-2 Ed5.0
IEC 61000-3-12 2011
IEC 61000-3-2 Ed2.2
JIS 61000-3-2 2005
IEC 61000-3-12 2004
F2
Meas Technic
IEC 61000-4-7 Ed2.0
IEC 61000-4-7 Ed2.1
IEC 61000-4-7 Ed1.0
F3
Class
A
B
C
D
F4
Sub Menu
F1
Nominal Voltage
230 V
Specified
F2
Specified Nominal Volt
(Input numeric value)
F3
Nominal Frequency
50 Hz
60 Hz
F6
Return
F5
To Meas Setting
Page
F6
Prev/Next
Nominal Value
Page 1/4
→
1
3
2
4
5
7
6
8
9
IEC 3-2 Ed3.0
JIS 3-2 2019
IEC 3-12 2011
IEC 3-2 Ed5.0
IEC 3-2 Ed2.2
JIS 3-2 2005
IEC 3-12 2004
Display of abbreviated
Limitation Standard names