Kikusui KHA3000, Operation Manual, Page: 366 / 392

366
KHA3000
B
Messages
SCPI command: Short-form command name
Influence: Commands influenced by *RST are marked with O.
R/W: Query command (R)/Set command (W)
Note: A standard SCPI command is 1, a command under examination is 2, and a KIKUSUI original
command is 3.
SYSTem subsystem
HARMonics subsystem
SCPI command Setting
Default
Response Influence
Description R/W
Note
Program header Parameter Unit
SYST
:BEEP
:VOL NR3 0 to 8 – 4 NR3 – Buzzer volume R/W 3
:CONF
:LANG char ENG | JAP – – char – Language (Japanese or English) R/W 3
:PCR bool ON | OFF – OFF NR1 –
Enables/Disables control of the AC
power supply.
R/W 3
:TEXT:ENC string “Shift-JIS” – – string – Character code encoding R/W 3
:DATE
NR1 2000 to 2099 – – NR1 – Sets the date (calendar year).
R/W 1
NR1 1 to 12 – – NR1 – Sets the date (month).
NR1 1 to 31 – – NR1 – Sets the date (day).
:TIME
NR1 0 to 23 – – NR1 – Sets the time (hour).
NR1 0 to 59 – – NR1 – Sets the time (minute).
:ERR[:NEXT] – – – –
NR1,
string
–
Queries error and event
information.
R 1
:LOC – – – – – –
Sets the local state
(RS232C and USB only).
W 2
:OPT – – – – – – Queries options. R 3
:REM – – – – – –
Sets the remote mode, in which
the keys and switches other than
LOCAL and STOP are locked
(RS232C and USB only).
W 2
:RWL – – – – – –
Sets the remote mode, in which
the keys and switches other than
STOP are locked (RS232C and
USB only).
W 2
:VERS – – – – 1999.0 –
Queries the SCPI specification
version with which this product is
compliant.
R 1
SCPI command Setting
Default
Response Influence
Description R/W
Note
Program header Parameter Unit
HARM
:APOW
:JIS:CONF
－ － － －
string
－
Queries the judgment result of AC
power source check.
:EXEC
－ － － －
NR1
－
Queries whether the result was
recorded when checking the AC
power source.