Kikusui KHA3000, Operation Manual, Page: 345 / 392

13
KHA3000
345
SCPI Register Model
Rem
ote Contr
ol
Preset Status
STAT:PRES
Restores the initial settings of ENABle/PTRansition/NTRansition filter registers of all status
registers (including subregisters).
Initial settings:
STATus:ENABle = 0x0000
STATus:PTRansition = 0x7FFF
STATus:NTRansition = 0x0000
Command
STATus:PRESet
Configures status data so that specific events are reported at a higher level by the status
reporting mechanism. These events are summarized in the OPERation status register and
QUEStionable status register of required structures.
STAT:PRES affects only the ENABle register and the transition filter registers of the status
data structure.
STAT:PRES does not clear data from the event register and error/event queue.
Use *CLS to clear data from every event register and the queues in the device status
reporting mechanism.
For status data required for SCPI, STAT:PRES sets the transition filter register so that only
positive transition is recognized and clears the ENABle register to all 0. This command does
not affect the settings of the service request enable register, parallel polling enable register,
memory registers related to the *SAV command, address of this product, output queue and
power-on status clear flag.
Preset values of the registers that can be set by the user
Register Filter/Enable Preset value
QUEStionable
OPERation Enable register All 0
Positive transition filter All 1
Negative transition filter All 0