Kikusui KHA3000, Operation Manual, Page: 332 / 392

332
KHA3000
Controlling the AC Power Supply
Setting the AC Power Supply
SOUR:OUTP
Sets the output of the AC power supply to on or off.
Command
SOURce:OUTPut[:STATe] {ON|OFF|1|0}
SOURce:OUTPut[:STATe]?
Parameter Value: ON(1) On
OFF(0) Off (default)
Response
Returns the setting (ON/OFF) of the output of the AC power supply in the <NR1> format.
SOUR:PHAS:ON
Sets the ON phase of the output of the AC power supply.
Command
SOURce:PHASe:ON <NRf>
SOURce:PHASe:ON?
Parameter Value: 0 to 360
-1 (no specification)
Unit: DEG
Response
Returns the ON phase of the output of the AC power supply in the <NR3> format.
SOUR:FREQ
Sets the frequency of the AC power supply.
Command
SOURce:FREQuency <NRf>
SOURce:FREQuency?
Parameter Value: 50 or 60
Unit: Hz
Response
Returns the frequency of the AC power supply in the <NR3> format.